CW Operation on the Remotes

CW Operation: Operating CW 

For CW operation, you must be in CW mode – hit
“C” on the keyboard.

The CW Keyboard is activated via the C key when
you select the CW mode and can be reactiveated/reset again via the C key
(typed in the main radio window)

Type in what you want to send and the system
will send it automatically using the VOX to control the radio. (Note: PTT is disabled
in CW mode.) The “macros” shown at the bottom of the “CW
Keyboard” will send common items including your own call in the messages.
Typing in the call of the other station will allow its use in the macros.

 

MACROS

Now that you are ready to go, it is good to set
up a few Macros to reduce the tedium of continually typing in the same thing
and to make the switchover between transmit and receive a little easier. For
those operations used to the extensive MACRO capability of the DigiPan, etc
this interface will appear quite simple, but it should be adequate for normal
remote ops (e.g. non-contesting). Several Macros used at W4MQ are shown below:

The MACRO capability supports two special
insertions, illustrated in the above examples:

• <MC> — Insert My Callsign here —
  This is the logon callsign
• <OC> — Insert the Other Callsign here
  (This is the callsign in the QSO Call text box).
• Each MACRO is settable by selecting the MACRO
  button using the RIGHT mouse click. The editing windows illustrated above then
  appear. Remember to SAVE when you are finished.

  To activate the MACRO you must either LEFT
  click on the MACRO button or use the key combinations SHIFT+CNTL+1 through
  SHIFT+CNTL+ 0 to activate the MACRO (you must use the  standard number
  keys and not the numeric keypad). The top five buttons are numbered  as 1
  through 5 and the bottom five buttons are numbered as  6 through 10 (0),

  CW Keying Speed

  The cw keying speed is adjustable by clicking
  on the speed or using the K from the keyboard and then using the < and >
  keys to decrease and increase the speed

  CW Sidetone Level

  Not all stations enable the CW side tone. If it
  is enabled then the level can be adjusted using the Mic Gain slider control

  Radio Control When in the CW Window

  Generally use of the ALT+key from within the CW
  window will provide the same functionality as the same key used directly in
  the Radio window.